PA1 Geprüft

• Power up to 480 watts at 1 ohm, signal-to-noise ratio 83.5 dB.
• Advanced Class-D technology, removable aluminum housing.
• Low-pass filter: 25-250 Hz, slope 12/24 dB/oct.
• More technical details

The PA 1 from Eton is a 1-channel amplifier distinguished by its newly developed Advanced Class-D amplifier technology. It features a high-quality aluminum die-cast housing in a matte Gunmetal Grey finish with a removable, milled aluminum top plate. Key features include an adjustable low-pass filter with selectable slope, an Auto-Sense On function, and start-stop capability. The amplifier offers adjustable gain and high-level input resistors as well as variable mounting feet for easy installation. With a power output of up to 480 watts at 1 ohm and a signal-to-noise ratio of 83.5 dB, it performs impressively across various volume ranges.

Features

• Newly developed Advanced Class-D amplifier technology
• Newly designed extremely high-quality aluminum die-cast housing in matte Gunmetal Grey finish with removable milled aluminum top plate
• Adjustable low-pass filter with selectable slope 12 / 24 dB/oct. and subsonic filter
• Auto-Sense On function (SIG / DC)
• Start-stop capable
• Adjustable gain 6 V – 0.45 V
• Adjustable high-level input resistance (EPS Load) per channel pair: 10 / 150 / 600 ohms
• Adjustable high-level input voltage per channel pair: 1 – 15 V / 15 – 40 V
• 2 high-level inputs, 2 low-level inputs (RCA)
• Detachable connectors for power and audio signal
• Variable mounting feet for quick and easy installation

Technical Data

• Power at 4 ohms: 1 x 200 watts
• Power at 2 ohms: 1 x 340 watts
• Power at 1 ohm: 1 x 480 watts
• Signal-to-noise ratio: 83.5 dB
• Damping factor at 4 ohms: >88
• THD+N: 0.01% @ 5W 1 kHz
• Low-pass active filter: CH1: 25 – 250 Hz with 12/24 dB/oct. slope
• Subsonic filter: 30 Hz
• Dimensions (L x W x H): 128 x 100 x 45 mm